Eldes EKB3 Installationshandbuch PDF herunterladen (Seite 129)

129

129EN

MANUAL ELDES ESIM264 V3.1

32.3. EWP1 – Wireless Motion Detector

Main EWP1 features:

• Violated zone detection by built-in PIR movement sensor.

EWP1 is a wireless device with built-in PIR movement sensor and operates with ELDES wireless alarm systems. The user only needs to switch

on the EWP1 sensor and bind it to ESIM264 alarm system by sending a corresponding command via SMS text message or using software ELDES

Conguration Tool. User can also monitor temperature of the surrounding areas in real-time as EWP1 has a built-in temperature sensor. It is

possible to connect up to 16 EWP1 devices to ESIM264 alarm system at a time. The maximum wireless connection range is 150 meters (in

open areas).

32.3.1. Technical Specications

32.3.1.1. Electrical & Mechanical Characteristics

Battery Type ER14505 AA Lithium Thionyl Chloride

Battery Voltage; Capacity 3,6 V; 2,4 Ah

Battery Operation Time ~18 months*

Wireless Transmitter-Receiver Frequency 868 MHz

Range of Operating Temperatures -10 ... +55°C

Dimensions 104x60x33mm

Humidity

0-90% RH @ 0... +40 °C (non-condensing)

Detection Coverage Angle 90°

Maximum Detection Distance 10 meters

Compatible with Alarm Systems ELDES Wireless

Wireless Communication Range Up to 30 meters in premises; up to 150 meters in open areas

* The operation time depends on dierent conditions and may vary.

1 Motion detector

2 LED indicators informing about status of PIR sensor EWP1

3 TAMPER button automatically identies when the box of sensor

EWP1 is open or closed

4 RESET button for reseting system parameters

5 ER14505 3,6 V Lithium Thionyl Chloride battery

32.3.2. Installation

1. Choose the place where intrusion into the premises is the most probable and install the device. To avoid false triggers of the system do

not install it in the following places:

• directing the lens to direct sunlight, for example, to the window of the premises;

• where there is a risk of sudden temperature alteration, for example, near a replace or heating system;

• where there is an enlarged possibility of dust or air ow;

• behind the curtain or some other cover blocking the detected zone.

2. Fix EWP1 sensors mounting holder with two screws to the wall and attach the sensor.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 167 168

Keine Kommentare

Eldes EKB3 Installationshandbuch Seite 129