Eldes ESIM264 Bedienungsanleitung PDF herunterladen (Seite 4)

2. System pre-operation and essential control commands

VERY IMPORTANT!!!

Underscore symbol ‘_’ in this manual is used to represent space. When writing SMS messages, every underscore symbol should be

replaced by single space symbol. XXXX – means password. Don’t leave any space at the beginning and the end of the message.

2.1 Password change

All SMS commands start with a password, so please memorize it well. Manufacturer default password is four zeros 0000, which is

necessary to change. Manufacturer default password can be changed by sending SMS message to ESIM264:

To replace your password, send SMS message:

XXXX – any four digit number except four zeros. Non-numerical characters like dots, colons, spaces

are not allowed. YYYY – old system password.

2.2 User numbers

System ESIM264 allows to pre-program up to ve dierent mobile numbers which will have access to and controls the system.

Number NR1 is mandatory while others can be skipped. All numbers must be entered starting with international country code. E.g.

national code for Lithuania is 370, UK – 44. Numbers should be entered based on priority, since the system will try to contact rst

entered number and in case of failure will follow with second and so on.

2.2.1 Saving or Changing numbers

Send SMS message:

Ones should be replaced with user numbers. Numbers don’t have to be entered all or in sequential order right away.

2.2.2 Verication of saved numbers

Send SMS message:

The system will reply with all pre-programmed numbers.

2.2.3 Deletion of saved numbers

Pre-programmed numbers can be erased by sending SMS message with numbers to be erased.

The system will not allow erasing rst number NR1. It can only be changed.

0000_PSW_XXXX

YYYY_PSW_XXXX

XXXX_NR1:37011111111_NR2:37011111111_NR3:37011111111_NR4:37011111111_NR5:37011111111

XXXX_NR2:DEL_NR3:DEL_NR4:DEL_NR5:DEL

XXXX_HELPNR

ESIM 264

0000 PSW

XXXX

1 2 3 4 5 6 7 8 9 ... 15 16

Keine Kommentare

Eldes ESIM264 Bedienungsanleitung Seite 4