Eldes EPIR Bedienungsanleitung PDF herunterladen (Seite 41)

EPIR2 User Manual v.1.4

Remote Listening

Function Command Value Range / Comment Example

Hear what is

happening in your

property

XXXX_MIC You can listen in to what is hap-

pening at your protected property

whenever you want by sending

this SMS/text message. The

system will make a phone call to

you and enable the microphone

in EPIR2. You must answer the

call within 20 seconds to listen

in to what is happening in your

property. If you do not pick up, the

system will stop trying and will

return to its previous state.

NOTE: If there is an alarm the

system will automatically make a

call so that you can listen to what

is happening in the property. In

this case, the system will try the

pre-programmed numbers in or-

der until its call is answered. The

phone call in the event of alarm

will be made UNLESS „Disable ring

from the system in case of alarm“

has been selected, see „alarm

notication settings“ above.

1111_MIC

Detector Sensitivity Level Settings

Function Command Value Range / Comment Example

Change the

sensitivity level of

the detector

XXXX_LEVEL:YY YY = [20... 99]

The greater the value, the

lower the sensitivity level of

the detector.

The EPIR2 device is pre-set by

the manufacturer at the opti-

mal detector sensitivity level.

However, in some cases, for

instance where the system is

installed in windy premises, the

air ow can cause false alarms.

In this case you can reduce the

sensitivity level.

1111_LEVEL:35

Check the sensi-

tivity level of the

detector

XXXX_LEVEL 1111_LEVEL

NOTE: The underscore symbol ‘_’ in these instructions represents a space. So when typing an

SMS/text message, replace the underscore symbol with a single space.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Eldes EPIR Bedienungsanleitung Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Eldes EPIR